Wash Solution 16oz
Pickup available at 9223 Harford Rd, Baltimore, MD 21234
Usually ready in 4 hours
Induction PureWash
Clean without compromise.
PureWash lifts dirt safely from the surface while reducing friction during contact—helping prevent swirls and wash-induced marring. The rich foam clings, breaks down contaminants, and rinses clean, leaving behind a subtle layer of protection that enhances the finish.
Built for professional results across all exterior surfaces—paint, PPF, vinyl, and coatings.
What it does:
- Safely lifts and encapsulates dirt
- High lubrication for scratch-free washing
- Adds a light protective layer after rinse
- Compatible with all exterior surfaces
Directions for Use:
- Fill a wash bucket ⅔ full with water
- Shake well and add 1–2 oz of PureWash
- Activate suds using a hose or pressure washer
- Wash vehicle from top to bottom using a mitt
- Rinse mitt frequently to avoid contamination
Pro Tip:
Wash in shaded conditions to minimize water spotting and maintain optimal results.
Key Benefits
- Graphene-infused ceramic protection
- Extreme hydrophobic water behavior
- Enhances gloss, depth, and slickness
- Helps protect against UV exposure and contaminants
- Safe for automotive paint and Induction PPF
- Professional-grade durability
What's in the Box
- 50ml of Graphene Coating
- Eyedropper
- Applicator Block
Application Instructions
1. Prepare Surface: Ensure the surface is clean, cool, and dust-free. Work in a shaded area.
2. Shake Well: Pour several drops onto an applicator pad.
3. Apply Coating: Use linear strokes with a 10% overlap in 3’ X 3’ (9 sq ft) sections.
4. Cure Time
- Below 90° F: Wait five minutes before wiping.
- Above 90° F: Wait two to three minutes (look for a “rainbow curing effect”)
5. Buff Off: Use a clean, dry microfiber towel, flipping frequently.
6. Post-Application: Keep the surface dry for 24 hours. Additional coats may be applied after one hour.